GW Instek GSP-930 User Manual - Manual (Page 190)

GSP-930 User Manual
188
For power meter: Power meter 1 ~5
4. For trace data, press Format[F4] to select the
format type to save:
Trace: Save trace data only
Trace+State: Save trace and state data
5. Press Save To[F1] and select a destination
source:
Register 1~6: Internal memory registers,
these internal registers are not
part of local memory
Local: Internal memory
USB: External memory
SD Card: External micro SD card
6. After a destination has been selected, the file
can be named or saved immediately.
7. To name the selected file, press
Name[F5]. Name the selected file
using the F1~F7 keys, as shown
below or use the numeric keypad
to enter numbers.:
7 8 9
6 5 4
1 2 3
/ 0
Limitations:
 No spaces
 Only 1~9, A~Z, a~z characters allowed