GW Instek GSP-930 User Manual - Manual (Page 107)

BASIC OPERATION
105
System Settings
System Information
Description The System Information displays the following:
Serial Number
Installed Options
Version: Calibration Date:
Software LOI
Firmware RF
File sys TG
RF DNS Hostname
TG MAC Address
DSP
Wordlist
Core
Operation 1. Press
System
>System Information[F1] to bring up
a list of the system information.
Error Messages
Description View error messages that are in the error queue
by message number, description and time. All
errors from the system error queue are logged
when operating the analyzer. For a list of the
error messages, please see the programming
manual.
Operation 1. Press
System
>Error message[F2] to bring up the
error message table.
2. Press Prev Page[F2] and Next Page[F3] to
navigate through each page of the error list.