GW Instek GSP-930 User Manual User Manual

Page 118

GSP-930 User Manual

116

ADJCH Offset[F4]

Set the adjacent channel
offset.

ADJCH HLimit[F5]

Set the adjacent channel
high limit.

ADJCH LLimit[F5]

Set the adjacent channel
low limit.

2. Repeat the above steps for the other adjacent

channels, if needed.

Move Channels
Up/Down

1. Press

Meas

> Channel Analysis[F1] and press

the following to move to another channel:

Channel Move Up[F5]

Next main channel.

Channel Move
Down[F6]

Previous main channel.

Note

The channel space (CH SPC) parameter
determines where the next main channel is
located.