GW Instek GSP-930 User Manual - Manual (Page 102)

GSP-930 User Manual
100
Setting the Display Mode
Description The GSP-930 has three different display modes
for viewing: spectrum, spectrograph and
topographic. It is also possible to view the
spectrum with the spectrographic or
topographic views using a split screen.
Spectrum Default display mode.
Spectrogram Useful for viewing
frequency or power in
the time domain.
Topographic Useful for observing the
frequency of events with
a trace.
Operation 1. Press
Display
>Window Setup[F1] and select the
display mode:
Spectrum[F1]:
Spectrogram[F3]:
Topographic[F4]:
Spectrogram+Spectrum[F5]:
Topographic+Spectrum[F6]:
Note
The same trace is used on the top and bottom for
the Spectrogram+Spectrum and
Topographic+Spectrum modes.