GW Instek GSP-930 User Manual User Manual

Page 168

Text mode
Original mode

GSP-930 User Manual

166

Sequence Editor window

Main display

Start

Edit/Stop

Edit icon

Add a Step

Up to 20 steps can be added to each sequence.
Each panel operation is recorded as a step.
After each panel operation is performed, press
the

Enter

key to record the step (in some cases

this is not necessary – check if the operation
appears in the sequence editor window).

In the following example the center frequency
and span are added as steps to a sequence:

1. Press

Frequency

>Center Freq[F1]>20MHz>

Enter

2. Press

Span

>Zero Span[F3]>

Enter

3. The two operations are added to the Sequence

Editor.

Note

The arrow keys can be used to move the cursor to
the desired step.