GW Instek GSP-930 User Manual - Manual (Page 151)

ADVANCED OPERATION
149
Add.limits[F4] Selects the operating
bands for FDD
duplexing:
None
BandII
BandIV
BandV
BandX
BandX11
BandXIII
BandXIV
MinOffset/
Limit Value[F5] Allows you to view the
parameters of each of the
offsets, including
start/stop frequency,
RBW, Abs Start/Stop
and Rel Start/Stop.
Pre-Set Test
Parameters:
802.XX For details on 802.11x and 802.16 SEM test
parameters, please see the SEM overview on
page 132
1. Press Setup[F1]>and choose a 802.XX test:
802.11b[F2]
802.11g[F3]
802.11n[F4]
802.16[F5]
2. Press Ref. Channel[F2] to view the predefined
settings for channel integrated bandwidth,
channel span, RBW and PSD ref.
3. Press Offset/Limit[F3] to view the parameter
values of each of the offsets, including Start and
Stop Frequency, RBW, Rel Start and Stop