GW Instek GSP-930 User Manual - Manual (Page 109)

BASIC OPERATION
107
Using the Wake-Up Clock
Description The GSP-930 has a wake-up clock to allow the
spectrum analyzer to automatically turn on at a
set time.
Operation 1. Press
System
>Date/Time[F4]>Wake-Up Clock[F3]
and set the following parameters:
Clock[F1]
Choose a wake-up clock
(1~7).
State[F2] Turns the selected clock
on/off.
Hour[F3] Set the wake-up hour
Minute [F4] Set the wake-up minute.
Rept. Single[F5] Set the wake-up clock to
repeat or single.
Note
Only single days can be configured for the wake-up
clock.