GW Instek GSP-930 User Manual - Manual (Page 147)

ADVANCED OPERATION
145
SEM measurements
Absolute
limit line
User Defined
Parameters 1. Press Setup[F1]>User Define[F6]to set SEM
measurement to user defined parameters.
2. Press Meas Type[F1] choose between
TotalPwrRef[F1] or PSDRef[F2].
3. Press Ref. Channel[F2] and set the following:
ChanIntegBW[F1] Sets the channel
integration bandwidth.
Chan Span[F2] Sets the channel span
RBW[F3] Sets the resolution
bandwidth.
TotalPwrRef[F4]/
PSDRef[F4] Sets the total
power/PSD reference
level.
4. Press Return[F7] to return the previous menu.