GW Instek GSP-930 User Manual - Manual (Page 127)

ADVANCED OPERATION
125
6. Press Time Axis[F3] to set horizontal axis
parameters:
Ref. Value[F1] Sets the starting time on
the time axis.
Ref. Pos[F2] Shifts the waveform X
number of grid
subdivisions.
Scale/Div[F3] Sets the grid division
scale when Auto Scale is
Off.
Auto Scale[F4] Toggles auto-scaling
on/off.
7. Press Deviation Axis[F4] to set depth (vertical)
parameters:
Ref.Value[F1] Offsets the reference
position (in frequency).
Ref.Pos[F2] Sets the reference
position of the waveform
on a horizontal grid
subdivision (1:10).
Scale/Div[F3] Sets the horizontal grid
division scale.
Auto Scale[F4] Toggles auto-scaling
on/off.
Operation:
trigger
configuration 8. Press AF Trigger[F5] to set the triggering
conditions:
FreeRun[F1] Disables the trigger, this
is the default setting.
Edge Slope[F2] Sets the trigger to rising
or falling edge.