GW Instek GSP-930 User Manual - Manual (Page 84)

GSP-930 User Manual
82
Selecting the Trigger Mode
Description In free run mode all signals are captured and
the trigger conditions are not used.
Modes Normal: The spectrum analyzer captures
every signal that meets the trigger
conditions.
Single: The spectrum analyzer captures
the first signal that meets the
trigger conditions.
Continuous: The spectrum analyzer captures
the first signal that meets the
trigger conditions then switches to
free run mode thereafter.
Operation 1. Press
Trigger
> Trigger Mode[F3] to toggle the
trigger mode:
Nor.:
Sgl.:
Cont.: Normal
Single
Continuous
2. Press Action Now[F5] to manually start
triggering.