GW Instek GSP-930 User Manual - Manual (Page 111)

BASIC OPERATION
109
Preset
The Preset function loads either factory default states or the user-
defined states – depending on the Preset configuration settings.
 Using the Preset Key → from page 109
 Save the User Preset Settings→ from page 109
 Preset Type Settings→ from page 110
 Power on Preset Settings → from page 110
Using the Preset Key
Description The
Preset key loads the factory default state or
user-defined preset settings. See the Preset
Type Settings on page 109 to set the type of
preset settings that are loaded.
Factory Preset The factory default settings are listed on page
209
Operation Press
Preset to load the preset settings.
Save the User Preset Settings
Description The user-defined preset settings can be created
by saving the current state as the user-defined
preset settings.
Operation Press
System
>Pwr On/Preset[F5]>Save User
Preset[F3] to save the current state as the User
Preset settings.