GW Instek GSP-930 User Manual - Manual (Page 94)

GSP-930 User Manual
92
Show Markers in Table
Description The GSP-930 has a Marker Table function to
show all the active markers and measurements
at once.
Operation 1. Press
Marker
> More 1/2[F7]>Marker Table[F2] and
turn the marker table on.
2. The display will split into two screens. The
bottom half will show the Marker Table with
the marker ID(normal, reference or delta), trace,
x-axis position (frequency/time) and the
amplitude of the marker.
Marker Table