Yokogawa DAQWORX - Manual (Page 67)

4-20 IM WX102-01E
4.9 Making Settings Per Channel
The settings explained in Section 4.2 to 4.8 can also be carried out per channel, by
following below procedures:
1 To open the channel settings related setting screen, click the Channels tab, or
select Settings > SET (Regular) Settings > Channel Settings from the menubar.
2 To open a single channel-specific setting screen, double-click the desired channel
number, displayed on the left side of the Channels setting screen.
3 If a DR is connected, you can make print settings in the setting screen that
appears when clicking the About Printing tab.