Yokogawa DAQWORX - Manual (Page 65)

4-18 IM WX102-01E
4.7 Selecting Channels to Save (for DC100, and
DR with FDD Option Only)
To save measurement data of the DC100, or a DR with FDD Option, to a floppydisk, data
will first be saved to an internal RAM disk. To select the measurement or Math channels
which data you want to write to the internal memory, follow below procedures:
1 To open the Channel Settings related setting screen, click the Channels tab, or
select Settings > SET (Regular) Settings > Channel Settings from the menubar.
For the Math channel related setting screen click the Math tab, or select Settings
> SET (Regular) Settings > Math Functions from the menubar.
Select here the channels to be saved
2
Select ON to save data to internal memory/floppydisk, or OFF, in the pull-down
menu which appears when you click the setting area below the Memory label (on
the far right side of the Channels setting screen).