Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 52)

Teledyne LeCroy SAS/SATA Software Menus and Toolbars
50 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Exclude ALIGN
Check this to exclude ALIGN primitives from the data capture.
Exclude RRDY (SAS only)
Check this to exclude RRDY primitives from the data capture.
Exclude NOTIFY (SAS only)
Check this to exclude NOTIFY primitives from the data capture.
Exclude Idle
Check this to exclude Idles from the data capture.
Define different patterns for pre-trigger and post-trigger data captures
Replaces the Capture tab with a Pre‐Trigger Capture tab and a Post‐Trigger Capture tab.
2.4 SAS/SATA Software Menus and Toolbars
The SAS/SATA software has the following menus and toolbars.
Note: The sections “SAS Main Toolbar” and “SATA Main Toolbar” on page 51 are shown separately to
indicate the different context sensitive toolbar options depending on whether SAS or SATA trace
or project is open.
2.4.1 SAS Main Toolbar
The following figure displays the SAS main toolbar.
Figure 2.3: SAS: Software Menus and Toolbar
Open Project File
Launch Trainer
Launch Jammer
Abort Capturing Without Saving Sample File
Start Target Emulator
Find DUT Stop Recording
Upload Manager
Start Recording
Stop Target Emulator
Save
Manual Trigger