Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 365)

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual 363
Scenario Actions Teledyne LeCroy
field is only used for specifying custom DWORDs). Note that choice of a mask and an
offset are still available when using captured DWORDs.
Figure 4.20: Using a Captured DWORD in a SAS Data Pattern
Captured data DWORDs may also be used in the Substitute Data DWORD test state
action. From the Action Properties screen, choose Substitute Data DWORD and then
select the Substitute for property. A drop‐down menu is provided (see below) that allows
the choice of a custom DWORD or any of the four captured DWORD registers.