Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 335)

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual 333
Compliance Test (SATA) Teledyne LeCroy
Figure 3.158: SATA: Compliance Test Selection
The Digital Test Group has:
 General Device Requirements: GTR‐01 through GTR‐05
 Native Command Queuing: NCQ‐01 through NCQ‐05
 Asynchronous Signal Recovery: ASR‐01 and ASR‐02
 Software Settings Preservation: SSP‐01 through SSP‐12
 Interface Power Management: IPM‐01 through IPM‐11
 Digital Optional Features: DOF‐01 and DOF‐02
The PHY Test Group has tests OOB‐03 through OOB‐07.
2. Choose the tests in the left pane of the dialog and click the Add>> button.
3. Enter a value for Capture Timeout.
Note: If test running time exceeds the Capture Timeout value, the test terminates.
4. Enter the Device Name.
5. Select the UTD Version as UTD 1.3 (for devices supporting up to SATA 2.6
specification) or UTD 1.4 (for devices supporting up to SATA 3.0 specification).