Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 352)

Teledyne LeCroy Scenario Libraries
350 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
4.5 Scenario Libraries
You can create any number of scenarios, which you then can archive on your host
machine’s hard drive. You also can download up to ten scenarios to each InFusion device
for test execution. You can think of the libraries as windows that hold scenarios.
Recall that each library is a separate *.infdb file.
4.5.1 Main Library
When you launch the InFusion application, it opens a window called the Main Library.
The main library is the default workspace for creating and storing new scenarios. The
main library corresponds with the following file in the InFusion folder on the host
machine’s hard drive:
default.infdb
4.5.2 File Libraries
You can save the main library with a name other than default (while still using the .infdb
file extension). The new file becomes a file library that is functionally equivalent to the
main library with the following exception: It does not open by default in the Main Library
window. You can navigate to other file libraries using the File Manager of the InFusion
application.
In this manual, the main library and other .infdb file libraries are collectively called
general libraries.
If you select Open Library, you see a window similar to the following:
Figure 4.12: Open Library File List