Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 251)

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual 249
Analysis Teledyne LeCroy
.
Figure 3.64: SATA: Choosing a Primitive
Check a Connection Type option radio button, if available, and click OK.
Zoom
You can Zoom from x1 to x256.
3.3.14 Bus Utilization View
The Bus Utilization View displays information on pending IO. To display the Bus Utilization
View of the current capture, 
click View > Bus Utilization View or click the button on the View Type toolbar.
Figure 3.65: SAS: Bus Utilization View for Pending SCSI IO
Figure 3.66: SATA: Bus Utilization View for Pending ATA IO
Available Bus Utilization Views are:
 Pending SCSI IO (for SAS)
 Pending ATA IO (for SATA)