Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 395)

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual 393
Scenario Batch Files Teledyne LeCroy
Run
Runs the scenario on hardware on specified ports. If you call this command for the first
time and the scenario was not assigned to the hardware and ports before, the scenario is
assigned to specified hardware and ports and then scenario runs on the hardware.
Format
Run(Serial Number, Scenario Name, Target Port)
Parameters
 Serial Number: Serial number of hardware
 Scenario Name: Name of scenario
 Target Port: Port number in port map