Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual User Manual

Page 453

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual

451

Sierra Trainer Generation Commands

Teledyne LeCroy

COMINIT Settings
COMINIT_NegLen

800

The number of bursts to send as part of this OOB
type.Each Burst is followed by an Idle. The Burst‐Idle
pairs are repeated the requested number of times,
and then followed by the Negation_length of Idle.

COMINIT_IdleLen

480

Burst time between each OOB idle in OOBIs.During
the specified period, the generator will send
ALIGN(0) at the specified speed.

COMINIT_BurstLen

160

Idle time between each OOB burst in OOBIs.During
the specified period, the generator will keep the line
at electric idle.

COMINIT_NumBursts

Negation time at the end of the OOB signal in
OOBIs.During the specified period, the generator will
keep the line at electric idle.

COMWAKE Settings
COMWAKE_NegLen

280

COMWAKE_IdleLen

160

Burst time between each OOB idle in OOBIs.During
the specified period, the generator will send
ALIGN(0) at the specified speed.

COMWAKE_BurstLen

160

Idle time between each OOB burst in OOBIs.During
the specified period, the generator will keep the line
at electric idle.

COMWAKE_NumBursts

Negation time at the end of the OOB signal in
OOBIs.During the specified period, the generator will
keep the line at electric idle.

COMSAS Settings

COMSAS_NegLen

2400

COMSAS_IdleLen

1440

Burst time between each OOB idle in OOBIs.During
the specified period, the generator will send
ALIGN(0) at the specified speed.

COMSAS_BurstLen

160

Idle time between each OOB burst in OOBIs.During
the specified period, the generator will keep the line
at electric idle.

COMSAS_NumBursts

Negation time at the end of the OOB signal in
OOBIs.During the specified period, the generator will
keep the line at electric idle.

Setting

Default
Value

Description