Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 274)

Teledyne LeCroy Navigation + View Toolbar
272 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
.
Figure 3.90: Third Level of Multilevel Filtering
Filter descending packets from trace highlight bar
If you check the Filter descend packets if ascend packet is filtered checkbox, the
application will only filter onward from the highlighted trace selection bar.
If you uncheck this option, the software only filters the filtered packet. For example, if
this option is checked and any SCSI command is selected, all transport and link packets of
this command are filtered. If you unchecked this option, only selected SCSI commands
are filtered.
3.8.4 Selectable Filter Options for SAS
The SAS Filter Options are:
 Command Data Pattern
 Bus Condition
 Primitive
 Incomplete Frames
 Address Frames
 SSP Frames
 SMP Frames
 STP Frames
 SCSI Commands
 SMP Commands