Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 230)

Teledyne LeCroy Analysis
228 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Figure 3.26: Report between Cursors
Report between Events
Click the option button next to the From the event selection dropdown list, click the
From down arrow to choose the 1st event, then enter the number of its occurrence. Next
click the To down arrow to choose the 2nd event, then enter the number of its
occurrence.
Figure 3.27: SATA: Report between Events
Click OK. The resulting report are limited to the capture between the defined events.
SAS vs. SATA: SAS adds Transport, SCSI Cmd, SMP Cmd, and Task Mng to the drop‐down
list and deletes FIS and Phy Reset.
Statistical Report Content
SAS: A complete SAS statistical report consists of the following reports, accessed by
clicking the corresponding tab in the dialog:
 General
 Bus Condition
 Primitive
 SSP Transport
 SMP Transport
 STP Transport
 ATA Command
 SCSI Command
 SMP Command
 Task Command
 SAS Address
 Read/Write Command
 Protocol Error
 Performance
 Lanes
 Others