Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 167)

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual 165
Emulation Teledyne LeCroy
Power Management Settings
Click the Power Management Setting tab in the Advanced Host Setting dialog to specify
the settings in the editable fields.
Figure 2.158: SATA: Power Management Settings
Set parameters for Host and/or Device initiated power management.
2.9.7 Project Settings
Set project settings in the Project Settings tab (see “Project Settings” on page 102 ).
Note: When using the Exerciser, channel 2 is not available and is grey.
2.9.8 Creating a Data Block
You can create the following types of data blocks, for use with data fields:
 Random data pattern
 Custom data pattern specifically for your application
 Counter data pattern
 Walking bit pattern
To create a data block, click the Default Data Block button on the Main toolbar, or
select Setup > Data Block to open the Data Block dialog box (see Figure 2.159 ).