Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 132)

Teledyne LeCroy Emulation
130 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Figure 2.103: SATA: Event Dropdown List
The following menu options are available for SATA events:
 Self Test Exit
 PM Request
 PM Response
 Wake Up
 Soft Reset
 OOB Signal
 Primitive
 Attach
 Detach
 Power On (see “Power On” on page 130 )
 Power Off
 PHY Setting & Change Speed
 Change Data Frame Size Setting
 DevSlp‐ Toggles pin 3 of the power segment of the of the SATA connector to high
setting.
 Exit DevSlp‐ Toggles pin 3 of the power segment of the of the SATA connector to
low setting.
Power On
The Power Sources command supports 1.2, 1.5, 3.3, 5.0 and 12 Volts electricity voltage.
Click the ... button to display the Power Sources dialog (see
Figure 2.104 on page 131 .