Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 183)

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual 181
Target and Device Emulation Teledyne LeCroy
2.12.2 Setting General Errors
Generate Periodic Error
Generate Periodic Error allows you to inject periodic error on Command frame, FIS frame,
stand alone primitive, and stand alone FIS. Check Generate Periodic Error and select the
period unit of time, number of IO commands, or number of kilobytes transferred, by
checking the corresponding option button.
Outgoing FIS Command Error or Outgoing FRAME Command Error
SAS: Check Generate Error on outgoing FRAME, then click the Setting button to open the
error setting dialog.
Figure 2.176: SAS: Outgoing Frame Error Setting
SATA: Check Generate Error on outgoing frame commands, then click the Setting button
to open the error setting dialog.
Figure 2.177: SATA: Outgoing FIS of Command Error Setting