Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 143)

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual 141
Emulation Teledyne LeCroy
6. Choose an export range and item, Command, or FIS, then click Export.
7. After the export action completes, open the exported *.sac or *.stc file.
Figure 2.128: SATA: Host Emulator Program With the Exported Commands
You can run this set of commands immediately, or you can modify it by inserting
instructions and/or additional commands.
2.9.4 Error and Command Settings
Each command type allows you to set a variety of command settings and to introduce
errors. Click the Option button on a command line to display the corresponding Protocol
Error and Command Settings dialog.
ATA Error and Command Settings
The Protocol Errors and Command Settings screen capture is shown below.
Figure 2.129: SAS: Protocol Error and Command Settings for ATA Dialog