CONTREX CX-1200 - Manual (Page 424)

C - 78
(Continued)
Appendix C: Parameter Summary Numeric Quick Reference (continued)
CP-485 Unlock CP E
Unlock Control Parameter E (CP-485) determines which Control Parameter can change, even when the keypad lockout is
active. For the Unlock CP E (CP-485) to function, KyPdLk Mask (CP-480) must be set to something other than “0” (All
Lock). Enter “0” in Unlock CP E (CP-485) to disable it from selecting any Control Parameter.
Minimum Value: 0 Maximum Value: 667
Default Value: 0 Units: Parameter Code
CP-486 Unlock CP F
Unlock Control Parameter F (CP-486) determines which Control Parameter can change, even when the keypad lockout is
active. For the Unlock CP F (CP-486) to function, KyPdLk Mask (CP-480) must be set to something other than “0” (All
Lock). Enter “0” in Unlock CP F (CP-486) to disable it from selecting any Control Parameter.
Minimum Value: 0 Maximum Value: 667
Default Value: 0 Units: Parameter Code
CP-487 Unlock CP G
Unlock Control Parameter G (CP-487) determines which Control Parameter can change, even when the keypad lockout is
active. For the Unlock CP G (CP-487) to function, KyPdLk Mask (CP-480) must be set to something other than “0” (All
Lock). Enter “0” in Unlock CP G (CP-487) to disable it from selecting any Control Parameter.
Minimum Value: 0 Maximum Value: 667
Default Value: 0 Units: Parameter Code
CP-488 Unlock CP H
Unlock Control Parameter H (CP-488) determines which Control Parameter can change, even when the keypad lockout is
active. For the Unlock CP H (CP-488) to function, KyPdLk Mask (CP-480) must be set to something other than “0” (All
Lock). Enter “0” in Unlock CP H (CP-488) to disable it from selecting any Control Parameter.
Minimum Value: 0 Maximum Value: 667
Default Value: 0 Units: Parameter Code
CP-489 Unlock Block
Unlock Block (CP-489) determines which block of Control Parameters can change values, even though keypad lockout is
active. The main list block parameter values are also allowed to be changed when the selected Unlock Block is active
and KyPdLk Mask (CP-480) is set to ‘UnlckBlk’ (4). For the Unlock Block (CP-489) to function, KyPdLk Mask (CP-480)
must be set to “4”
Minimum Value: 0 Maximum Value: 7
Default Value: 7 Units: Block Number