CONTREX CX-1200 - Manual (Page 402)

C - 56
(Continued)
Appendix C: Parameter Summary Numeric Quick Reference (continued)
CP-375 Std Alm Msk
The Standard Alarm Mask (CP-375) allows you to mask out specific alarms so that they will not cause the ‘Alm’ indicator
to flash (in the lower left-hand corner of the CX-1200 screen) by entering a “0” in the corresponding bit position (see
figure below). You can also activate any of these alarm conditions by entering a “1” in the corresponding bit position.
Drive No Resp
Fb@MaxHz
CO_Sig@Max
Not In Use
Not In Use
Not In Use
Not In Use
MaxSpdLmt
Minimum Value: 00000000 Maximum Value: 11111111
Default Value: 00000000 Units: Coded
CP-376 CustAlm Msk
Custom Alarm Mask (CP-376) allows you to mask out the compare results so that they will not cause the ‘Alm’ indicator
to flash (in the lower left-hand corner of the CX-1200 screen) by entering a “0” in the corresponding bit position (see
figure below). You can also activate any of these compare conditions by entering a “1” in the corresponding bit
position.
Cmpr1 Out
Cmpr2 Out
Cmpr3 Out
Cmpr4 Out
Cmpr1 Out (Not)
Cmpr2 Out (Not)
Cmpr3 Out (Not)
Cmpr4 Out (Not)
Minimum Value: 00000000 Maximum Value: 11111111
Default Value: 00000000 Units: Coded