CONTREX CX-1200 - Manual (Page 356)

C - 10
(Continued)
Appendix C: Parameter Summary Numeric Quick Reference (continued)
MP-90 SerCom Char In
Serial Communications Character In (MP-90) displays the value of the last byte that was received by the Serial
Communications port. SerCom Char In (MP-90) is displayed in a decimal format. SerCom Char In (MP-90) is used
primarily for troubleshooting.
Minimum Value: 0 Maximum Value: 255
Units: Binary Character
MP-91 SerCom Errs
Serial Communications Errors (MP-91) displays all serial communications errors that occurred during the most recent
transmission.
Parity Error
Framing Error
Noise Error
Overrun Error
Invalid Function
ETX Not Received
Buffer Overflow
CRC Error
Minimum Value: 00000000 Maximum Value: 11111111
Units: Coded
MP-94 ROM Test
ROM Test (MP-94) displays the result of the most recent ROM Test. ROM Test runs a checksum test on the CX-1200
program memory.
1 = Memory Test Fail
0 = Memory Test Pass
Minimum Value: 0 Maximum Value: 1
Units: Coded
MP-95 SRAM Test
SRAM Test (MP-95) displays the result of the most recent SRAM Test. SRAM Test runs a read/write test on the
scratch-pad memory.
1 = Memory Test Fail
0 = Memory Test Pass
Minimum Value: 0 Maximum Value: 1
Units: Coded