AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 994)

C-2 41-001343-01 Rev 03, Release 3.2.2
Sample Configuration Files
This section consists of the sample configuration files necessary to configure the IP phones. The
general format is similar to configuration files used by several Unix-based programs. Any text
following a number sign (#) on a line is considered to be a comment, unless the # is contained
within
double-quotes. Currently, Boolean fields use 0 for false and 1 for true.
6757i Sample Configuration File
# Sample Configuration File
# ===========================
# Date: October 20th, 2005
# Phone Model: 6757i
# Notes:
#
# The general format used here is similar to configuration files
# used by several UNIX-based programs. Any text following a number
# sign (#) is considered to be a comment, unless the number sign is
# contained within double-quotes ("#") where it is considered to be
# a pound. For Boolean fields, 0 = false, 1 = true.
# Comments:
#
# This file contains sample configurations for the "aastra.cfg", .cfg, or
# ".cfg" file. The settings included here are examples only.
# You should change/comment the values to suit your requirements.
#
# Not all possible paramters are shown, refer to the admin guide for
# the full list of supported parameters, their defaults and valid
# ranges.
#
# The Aastra 6737i, 6757i, 6757iCT, and 6753i phones will download 2
# configuration files from the TFTP server while restarting, the
# "aastra.cfg" file, the “.cfg” file, and the ".cfg" file. These three configuration
# files can be used to configure all of the settings of the phone with
# the exception of assigning a static IP address to a phone and line
# settings, which should only be set in the ".cfg" file.
#
# The "aastra.cfg" file configures the settings server wide, the “.cfg” file contains model specific
# information (for example, “6757i.cfg”), while the ".cfg" file configures only the phone with the MAC