AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 886)

41-001343-01 Rev 03, Release 3.2.2 A-155
Call Hold Reminder
Call Hold Reminder Timer
Parameter –
call hold reminder
Call Hold Reminder
(in Web UI)
Aastra Web UI: Basic Settings->Preferences
Configuration Files aastra.cfg, .cfg, .cfg
Description Enables or disables the reminder ring splash timer to start as soon as you
put a call on hold (even when no other calls are active on the phone).
When enabled, the phone initiates a reminder ring splash periodically for
the single call on hold. When disabled, no reminder ring splash is audible.
Format Boolean
Default Value 0
Range 0 (disable)
1 (enable)
Example call hold reminder: 1
Parameter –
call hold reminder timer Configuration Files aastra.cfg, .cfg, .cfg
Description Specifies the time delay, in seconds, that a ring splash is heard on an
active call when another call was placed on hold. For example, if a call
comes into Line 1, and then a call comes into Line 2 and you answer Line
2, Line 1 is automatically placed on hold. While on the active Line 2, after
7 seconds, a ring splash audio sounds on the line reminding you that the
call on Line 1 is still on hold. This timer begins to increment after Line 2 is
answered.
Notes:
1. This parameter is used with the “call hold reminder frequency”
parameter.
2. You must enable this “call hold reminder timer” parameter for it to work.
3. A value of “0” disables the call hold reminder feature.
Format Integer
Default Value 7
Range 0-4294967295 seconds
Example call hold reminder timer: 10