AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 149)

3-62 41-001343-01 Rev 03, Release 3.2.2
For information about configuring softkeys, programmable keys, and expansion module keys,
see Chapter 5, the section, “Softkeys/Programmable Keys/Feature Keys/Expansion Module
Keys” on page 5-136.
Action URI
The IP phones have a feature that allows an administrator to specify a uniform resource
identifier (URI) that triggers a GET when certain XML events occur. The Action URI feature
prevents the phones from hanging if the Action URIs should fail. The phones also support
transparent, non-blocking, XML post execute item URIs.
The IP phone XML events that support this feature are defined in the following table.
You can set these parameters using the configuration files or the Aastra Web UI.
Reference
For more information about setting the Action URIs for XML applications, see
“Action URIs”
on page 5-308 .
Action URI Description
Startup Specifies the URI for which the phone executes a GET on when a startup
event occurs.
Successful Registration Specifies the URI for which the phone executes a GET on when a
successful registration event occurs.
Registration Event Specifies the URI for when registration events occur or when there are
registration state changes.
Note: This action URI is not called when the same event is repeated (for
example, a timeout occurs again when registration is already in a timeout
state.)
Incoming Call Specifies the URI for which the phone executes a GET on when an
incoming call event occurs.
Outgoing Call Specifies the URI for which the phone executes a GET on when an
outgoing call event occurs.
Offhook Specifies the URI for which the phone executes a GET on when an offhook
event occurs.
Onhook Specifies the URI for which the phone executes a GET on when an onhook
event occurs.
Connected Specifies the URI for which the phone executes an HTTP GET when it
goes into the “connected” state. This includes regular phone calls, intercom
calls, paging calls, RTP streaming, and the playing of a WAV file. It is also
triggered when the phone establishes the second leg of a 3-way call.
Disconnected Specifies the URI that the phone executes a GET on, when it transitions
from the incoming, outgoing, calling, or connected state into the idle state.
XML SIP Notify Specifies the URI to be called when an empty XML SIP NOTIFY is received
by the phone.
Poll Specifies the URI to be called every "action uri poll interval" seconds.
Poll Interval Specifies the interval, in seconds, between calls from the phone to the
"action uri poll".