AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 30
41-001343-01 Rev 03, Release 3.2.2
1-13
*See the Aastra 6735i User Guide for more information about each of these keys.
Programmable keys - 6 Top keys: programmable hard keys (up to 6
programmable functions)
By default, the top keys 1 through 4 are assigned as Services, Directory,
Callers List, and Intercom, respectively. Keys 5 and 6 have no assigned
functions. All 6 keys are programmable and can be assigned to perform
specific functions.
The following are the default functions for the programmable keys on the
6735i IP phone:
1 - SERVICES
Accesses enhanced features and services such as
XML applications and voicemail, provided by third
parties.
2 - DIRECTORY
Displays up to 200 names and phone numbers
(stored in alphabetical order).
3 - CALLERS LIST Accesses the last 200 calls received.
4 - ICOM
Accesses another extension on the network.
5 - NONE
No assigned function.
6 - NONE
No assigned function.
Note: For more information about configuring the programmable keys 1
through 6 to perform specific functions, see
“Softkeys/Programmable Keys/Feature
.
Softkeys - 6 Bottom keys: programmable state-based softkeys (up to 20
programmable functions).
By default, the bottom softkeys 2 through 6 have no assigned functions.
You can configure all 6 bottom softkeys to perform specific functions on
the 6755i IP phone. However, after you lift the handset, there are specific
static softkeys that display that cannot be changed. These are as follows:
1 - DIAL
Allows you to dial out on the phone.
2 - CONF
Begins a conference call with the active phone.
3 - XFER
Transfers the active call to another number.
Note: For more information about configuring softkeys 1 through 6 to
perform specific functions, see
Chapter 5, “Configuring Operational
the section,
“Softkeys/Programmable Keys/Feature Keys/
Symbol Keys
Text Keys
Key Description