AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 851
A-120
41-001343-01 Rev 03, Release 3.2.2
Parameter –
802.1x root and intermediate
certificates
Root and Intermediate
Certificates
(in Web UI)
Aastra Web UI:
Advanced Settings->802.1x Support->
EAP-TLS Settings
Configuration Files aastra.cfg,
Description
Specifies the file name that contains the root and intermediate
certificates related to the local certificate.
You can use this parameter in three ways:
•
To download no certificates
•
To download a certificate from the original configuration server
•
To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A FILENAME
at the end of the string. For example:
802.1x root and intermediate certificates:ftp://
admin:[email protected]:50/path/phones802RootCert.pem
where “path” is the directory and “phones802RootCert.pem” is the
filename. If you do not specify a filename, the download fails.
See examples for each below.
Format
String
Default Value
Not Applicable
Range
Not Applicable
Example
The following example downloads no 802.1x root and intermediate
certificate file:
802.1x root and intermediate certificates:
The following example downloads the 802.1x root and intermediate
certificate file from the original configuration server.
802.1x root and intermediate certificates: phones802RootCert.pem
The following example uses FTP to download the firmware file
“phones802RootCert.pem” (802.1x root and intermediate certificate file)
from the “path” directory on server 1.2.3.4 using port 50:
802.1x root and intermediate certificates:ftp://
admin:[email protected]:50/path/phones802RootCert.pem