AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 45)

1-28 41-001343-01 Rev 03, Release 3.2.2
*See the Aastra 6757i or 6757i CT User Guide for more information about each of these keys.
Softkeys - 12 softkeys on the 6757i IP Phone.
- 6 Top Keys: programmable static softkeys (up to 10 programmable
functions)
- 6 Bottom Keys: programmable state-based softkeys (up to 20
programmable functions)
By default, the top softkeys 1 through 4 are assigned as Services, Directory,
Callers List, and Intercom, respectively. Keys 5 and 6 have no assigned
functions. All 6 keys are programmable and can be assigned to perform
specific functions.
The following are the default functions for the top softkeys on the 6757i IP
phone:
1 - SERVICES Accesses enhanced features and services such as
XML applications and voicemail, provided by third
parties.
2 - DIRECTORY Displays up to 200 names and phone numbers (stored
in alphabetical order).
3 - CALLERS LIST Accesses the last 200 calls received.
4 - ICOM
Accesses another extension on the network.
5 - NONE No assigned function.
6 - NONE No assigned function.
7 - NONE No assigned function.
By default, the bottom softkeys 8 through 12 have no assigned functions.
You can configure all 6 bottom softkeys to perform specific functions on the
6757i IP phone. However, after you lift the handset, there are specific static
softkeys that display that cannot be changed. These are as follows:
7- DIAL Allows you to dial out on the phone.
8- CONF Begins a conference call with the active phone.
9- XFER Transfers the active call to another number.
Note: For more information about programming the softkeys to perform
specific functions, see
Chapter 5, “Configuring Operational Features” the
section, “Softkeys/Programmable Keys/Feature Keys/Expansion Module
Keys” on page 5-136 .
Symbol Keys Text Keys Key Description