AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 1016)

C-24 41-001343-01 Rev 03, Release 3.2.2
# The "aastra.cfg" file configures the settings server wide, the “
# information (for example, “6757i.cfg”), while the ".cfg" file configures only the phone with the MAC
# address for which the file is named (for example, "00085d0304f4.cfg"). The settings in the "aastra.cfg"
# file will be overridden by settings that also appear in the ".cfg" file.
# Settings in the “.cfg” file override setting that appear in the “aastra.cfg” and “.cfg files.
#-----------------------------------------------------------------
# DHCP Setting
# =============
#dhcp: 1 # DHCP enabled.
# DHCP:
# 0 = false, means DHCP is disabled.
# 1 = true, means DHCP is enabled.
#
# Notes:
#
# DHCP is normally set from the Options list on the phone or
# the web interface
#
# If DHCP is disabled, the following network settings will
# have to be configured manually either through the configuration
# files, the Options List in the phone, or the Web Client: IP
# Address (of the phone), Subnet Mask, Gateway, DNS, and TFTP
# Server.
#-----------------------------------------------------------------
# Network Settings
# = = = = = = = = =
# Notes: If DHCP is enabled, you do not need to set these network
# settings. Although depending on you DHCP server configuration
# you may still have to set the dns address.
#ip: # This value is unique to each phone on a server
# and should be set in the ".cfg" file if
# setting this manually.
#subnet mask:
#default gateway:
#dns1: