Time server settings – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 786

41-001343-01 Rev 03, Release 3.2.2
A-55
Time Server Settings
Parameter –
time server disabled
NTP Time Servers
(in Web UI)
Aastra Web UI
Basic Settings->Preferences->
Time and Date Settings
IP Phone UI‘
Options->Preferences->
Time and Date->Time Servers
Configuration Files
aastra.cfg,
Description
Enables or disables the time server. This parameter affects the time
server1, time server2, and time server3 parameters. Setting this
parameter to 0 allows the use of the configured Time Server(s). Setting
this parameter to 1 prevents the use of the configured Time Server(s).
Note: For DHCP to automatically populate this parameter, your DHCP
server must support Option 66.
Format
Integer
Default Value
0 (disabled)
Range
0 (disabled)
1 (enabled)
Example
time server disabled: 0
Parameter –
time server1
Time Server 1
(in Web UI)
Aastra Web UI
Basic Settings->Preferences->
Time and Date Settings
IP Phone UI‘
Options->Preferences->
Time and Date->Time Servers
Configuration Files
aastra.cfg,
Description
The primary time server's IP address or qualified domain name. If the
time server is enabled, the value for time server1 will be used to request
the time from.
Note: For DHCP to automatically populate this parameter, your DHCP
server must support Option 66.
Format
IP address or qualified domain name
Default Value
0.0.0.0
Range
Not Applicable
Example
time server1: 192.168.0.5