Picture id feature, Picture id feature -39 – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 316
41-001343-01 Rev 03, Release 3.2.2
5-39
Picture ID Feature
The Picture ID feature on the 6739i shows a picture ID of a caller on the LCD for all of the
following events on the phone:
• Incoming Calls (matched to Caller ID numbers)
• Outgoing Calls (matched to dialed numbers)
• Directory entries
• Callers List entries
• Redial List entries
Your Admininstrator stores the pictures in a centralized picture repository. The pictures are
dynamically retrieved from the centralized server for each call and then locally cached in the
phone to reduce network traffic.
If there is no picture on the central server for the dialed number and/or Caller Id
number, and Directory, Callers List, and/or Redial List entry, the generic blue figure
image is shown.
Pictures must be in “.png” format, 150pixels wide x 200pixels tall, and in 24 bit
color. The filenames for pictures must be stored using the phone number as the
filename (for example, 9995551234.png). Enabling and disabling Picture ID on the
phone can be done by an Administrator using the configuration files only.
Enabling/Disabling the Picture ID on the Phone Using the Configuration Files
Use the following parameter to enable/disable Picture ID on the phone.
Note:
The Picture ID feature supports the use of TFTP, FTP, HTTP, and HTTPS
protocols when downloading pictures.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
on
Generic
Blue Image