Configuring language input using the ip phone ui – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 330

41-001343-01 Rev 03, Release 3.2.2
5-53
Configuring Language Input Using the Configuration Files
An Administrator can specify the input language to use by entering a specific parameter in the
configuration files. An Administrator must enter the following parameter to enable this feature:
•
input language
Use the following procedures to specify the input language to use on the IP phone.
Configuring Language Input Using the IP Phone UI
Once “Language Input” is enabled, an Administrator or User can change the input language on the
phone using the IP Phone UI. The “Input Language” option appears under the Language option
in the IP Phone UI.
Example
Use the following procedure to change the input language using the IP Phone UI.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
on
Aastra IP Phone UI
Step Action
1
Press the Options key.
2
Select Language from the Options List.
3
Select Input Language from the Language List.
Language
1. Screen Language
2. Input Language
- Select
Done -
Preferences
1. Tones
2. Contrast Level
3. Speed Dial Edit
4. Live Dialpad
5. Set Audio
6. Time and Date
7. Language
- Select
Done -
Input Language
1. English
2. Français
3. Español
4. Deutsch
5. Italiano
6. Русский
Done -
Cancel -
Language Option
Input Language Option
Languages Available