Limitations for malaysian cadences, Italian tone set cadences, Slovak tone set cadences – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 402
41-001343-01 Rev 03, Release 3.2.2
5-125
Limitations for Malaysian Cadences
• The phone does not apply a different volume level to the first part of the call waiting tone.
• The level of the 50Hz modulation signal for ring back is 90%.
Italian Tone Set Cadences
The following are Italian tone set cadences.
Slovak Tone Set Cadences
The following are Slovak tone set cadences.
Configuring Priority Alerting and Ring Tone Cadences using the Configuration
Files
Use the following procedures to configure priority alerting and ring tone cadences on the IP
phones.
Tone
Frequency (Hz)
Cadence (on/off)
Dial
425
0.2/0.2/0.6/1.0
Secondary Dial
425
Continuous
Ringing
425
1.0/4.0
Busy
425
0.5/0.5
Congestion
425
0.2/0.2
Call Waiting
425
0.40/0.10/0.25/0.10/0.15
Tone
Frequency (Hz)
Cadence (on/off)
Dial
425
0.33/0.33/0.66/0.66
Secondary Dial
425
(0.165/0.165)x3 /0.66/0.66
Ringing
425
1.0/4.0
Busy
425
0.33/0.33
Congestion
425
0.165/0.165
Call Waiting
425
0.33 on repeating every 10
sec when Call Waiting period
is set to 10
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the sections,
•
on
•