AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 771
A-40
41-001343-01 Rev 03, Release 3.2.2
Parameter–
https user certificates
Trusted Certificates
Filename
(in Web UI)
Configuration Files
aastra.cfg,
Aastra Web UI
Advanced Settings->Network->HTTPS Settings
Description
Specifies a file name for a .PEM file located on the configuration server. This
file contains the User-provided certificates in PEM format. These certificates
are used to validate peer certificates.
Note: You must disable the “https validate certificates” parameter in order
for the phone to accept the User-provided certificates.
You can use this parameter in three ways:
•
To download no certificates
•
To download a certificate from the original configuration server
•
To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A FILENAME at the
end of the string. For example:
https user certificates: ftp://admin:[email protected]:50/path/
phonesHTTPSUserCert.pem
where “path” is the directory and “phonesHTTPSUserCert.pem” is the
filename. If you do not specify a filename, the download fails.
See examples for each below.
Format
Alphanumeric string in the format
Default Value
Not Applicable
Range
Not Applicable
Example
The following example downloads no HTTPS user certificate file:
https user certificates:
The following example downloads the HTTPS user certificate file from the
original configuration server.
https user certificates: phonesHTTPSUserCert.pem
The following example uses FTP to download the firmware file
“phonesHTTPSUserCert.pem” (HTTPS user certificate file) from the “path”
directory on server 1.2.3.4 using port 50:
https user certificates:ftp://admin:[email protected]:50/path/
phonesHTTPSUserCert.pem