AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 901)

A-170 41-001343-01 Rev 03, Release 3.2.2
Per-Line Setting
Display of Call Destination for Incoming Calls
Parameter –
sip lineN diversion display
(N is a line number from
1 to 9)
Configuration Files aastra.cfg, .cfg, .cfg
Description For a specific line on the phone, this parameter enables/disables the
display of the Caller ID and/or caller name, and reason for diversion on
the phones LCD for an outgoing call that is being diverted to another
destination. The phone that receives the diverted call displays the Caller
ID of the original call destination.
Note: You must restart the phone after setting a value for this parameter.
Format Boolean
Default Value 1
Range 0 (disabled - do not display diversion information to the phone’s LCD)
1 (enabled - display diversion information to the phone’s LCD)
Example sip line1 diversion display: 0
Parameter –
show call destination name Configuration Files aastra.cfg, .cfg, .cfg
Description Enable/disables the display of the call destination name to the LCD on
the phone during incoming calls.
Format Boolean
Default Value 0
Range 0 (disabled)
1
(enabled)
Example show call destination name: 1