AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual

Page 434

41-001343-01 Rev 03, Release 3.2.2

5-157

Enabling/Disabling Ability to Add or Edit a speeddial Key

The IP Phones allow you to set a parameter, “speeddial edit” using the configuration files that

allows you to enable or disable the ability to add a speeddial key or edit a speeddial key from the

IP Phone UI. Disabling this parameter prevents a user from adding or editing a speeddial key.

The default for this parameter is enabled, allowing you to create and edit speeddial keys on the

phone using the Press-and-hold feature, softkeys, programmable keys, expansion module keys and

key pad, speeddial menu in the IP Phone UI, and the SAVE TO key.

If this parameter is set to disabled, it blocks the user from using any of the features on the phone to

create or edit a speeddial key.

Enabling/Disabling the Ability to Add or Edit a speeddial Key Using the
Configuration Files

Use the following procedure to enable/disable the ability to add and edit a speeddial key.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section,