Operational features, Description, User passwords – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 282: Configuring a user password, Operational features -5, Description -5, User passwords -5

41-001343-01 Rev 03, Release 3.2.2
5-5
Operational Features
Description
This section describes the operational features managed and configured by a System
Administrator.
User Passwords
A user or an administrator can change the user passwords on the phone using the configuration
files, the IP phone UI, or the Aastra Web UI.
Use the following procedures to change the user password.
Configuring a User Password
Note:
The IP phones support numeric characters only in passwords. If
you enter a password with alpha characters, the phone uses the default
password instead.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
on
IP Phone UI
1
Press
on the phone to enter the Options List.
2
Select User Password.
3
Enter the current user password.
4
Press Enter.
5
Enter the new user password.
Note: The IP phones support numeric characters only in passwords. If you enter a password with
alpha characters, the phone uses the default password instead.
6
Press Enter.
7
Re-enter the new user password.
8
Press Enter.
A message, "Password Changed" displays on the screen.
For the 6739i:
1
Press the Options key on the phone to enter the Options List.