Configuring basic sip network settings (optional) – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 241

4-78
41-001343-01 Rev 03, Release 3.2.2
Configuring Basic SIP Network Settings (optional)
You can configure SIP network settings using the configuration files, the IP Phone UI, or the
Aastra Web UI.
Configure Per-Line Call Waiting
11
The "Call Waiting" field is set to “Global” by default. To enable call waiting for a specific line, select
“enabled” from the list in this field. To disable call waiting for a specific line, select “disabled” from
the list in this field.
For more information about setting the call waiting parameters, see Chapter 5, the section,
12
Click
to save your changes.
Note:
To configure the SIP settings per-line, use the configuration files or
the Aastra Web UI.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
on
or
“SIP Basic, Per-Line Settings”
Note:
You can set global configuration only using the IP Phone UI.
IP Phone UI
Step Action
1
Press
on the phone to enter the Options List.
2
Select Administrator Menu.
3
Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4
Select SIP Settings.
Configuring Proxy IP and Proxy Port
5
Select Proxy IP/Port.
6
Enter an IP address or fully qualified host name in the Proxy Server field. Default is 0.0.0.0.
Aastra Web UI
Step Action