AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 662)

41-001343-01 Rev 03, Release 3.2.2 6-35
For the 6739i
13 Use the keys as applicable while entering the password; then press Done (8 and 11-Line LCD
phones).
or
Press Set (3-Line LCD phones.
14 Press the key to save your settings and exit from the IP Phone UI.
Aastra IP Phone UI
Step Action
1 Press to enter the Options List.
2 Press Advanced and enter your Administrator password using the pop-up keyboard.
3 Press Network.
4 Press the button to scroll to the next page.
5 Press Ethernet & VLAN.
6 Press 802.1x Support.
7 Press EAP Type and select a value to set. Valid values are:
• Disable (Default)
• EAP-MD5 (phone uses MD5 authentication)
• EAP-TLS (phone uses TLS authentication)
•
Note: The 802.1x Protocol is disabled by default. If you select EAP-TLS authentication, you must use
the configuration files or the Aastra Web UI to configure the certificates and private key for the phone.
8 Press EAP-TLS Settings.
9 Press Identity, and then press the text box. A pop-up keyboard displays allowing you to enter a
username used for authenticating the phone.
10 Press MD5 Password, and then press the text box to enter the password used for authenticating the
phone.
Note: You must restart the phone for the 802.1x authentication parameters to take affect.
11 Navigate to the Options screen and press Restart to restart the phone.
Aastra IP Phone UI
Step Action