Group paging rtp settings, Key mapping – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 113
3-26
41-001343-01 Rev 03, Release 3.2.2
Group Paging RTP Settings
Key Mapping
Parameter in
Aastra Web UI
Parameter in
Configuration Files
Description
Paging listen addresses
Note: This option can
be set by both Users
and Administrators.
paging group listening
Allows you to specify up to 5 listening multicast addresses to send/
receive a Real Time Transport Protocol (RTP) stream to/from these
pre-configured multicast address(es) without involving SIP signaling.
For more information on this feature, see
on
.
Parameter in
Aastra Web UI
Parameter in
Configuration Files
Description
Map Redial Key To
map redial key to
Sets the Redial key as a speeddial key if a value is entered for this
parameter. If you leave this parameter blank, the Redial key returns
to its original functionality.
Note: If you configure the Redial key for speeddialing on the 9480i
CT or 6757i CT Base Stations, the Redial key on the 9480i CT and
6757i CT handsets retain their original functionality. The Redial key
on the handset is not configured for speeddial.
For more information on this feature, see
Map Conf Key To
map conf key to
Sets the Conf key as a speeddial key if a value is entered for this
parameter. If you leave this parameter blank, the Conf key returns to
its original functionality.
Note: If you configure the Conf key for speeddialing on the 9480i CT
or 6757i CT Base Stations, the Conf key on the 9480i CT and 6757i
CT handsets retain their original functionality. The Conf key on the
handset is not configured for speeddial.