AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 42)

41-001343-01 Rev 03, Release 3.2.2 1-25
*See the Aastra 6755i User Gu 90 ide for more information about each of these keys.
Navigation keys - Pressing the UP and DOWN arrow keys lets you view
different status and text messages on the LCD display (if there is more
than 1 line of status/text messages). These buttons also let you scroll
through menu selections, such as the Options List.
Pressing the LEFT and RIGHT arrow keys lets you view the different line/
call appearances. While in the Options List, these keys allow you to exit or
enter the current option. When you are editing entries on the display,
pressing the LEFT arrow key erases the character on the left; pressing the
RIGHT arrow key sets the option.
Programmable keys - 6 Top keys: programmable hard keys (up to 6
programmable functions)
By default, the top keys 1 through 4 are assigned as Services, Directory,
Callers List, and Intercom, respectively. Keys 5 and 6 have no assigned
functions. All 6 keys are programmable and can be assigned to perform
specific functions.
The following are the default functions for the programmable keys on the
6755i IP phone:
1 - SERVICES Accesses enhanced features and services such as
XML applications and voicemail, provided by third
parties.
2 - DIRECTORY Displays up to 200 names and phone numbers
(stored in alphabetical order).
3 - CALLERS LIST Accesses the last 200 calls received.
4 - ICOM
Accesses another extension on the network.
5 - NONE No assigned function.
6 - NONE No assigned function.
Note: For more information about configuring the programmable keys 1
through 6 to perform specific functions, see
Chapter 5, “Configuring
Operational Features” the section, “Softkeys/Programmable Keys/Feature
Keys/Expansion Module Keys” on page 5-136 .
Softkeys - 6 Bottom keys: programmable state-based softkeys (up to 20
programmable functions).
By default, the bottom softkeys 2 through 6 have no assigned functions.
You can configure all 6 bottom softkeys to perform specific functions on
the 6755i IP phone. However, after you lift the handset, there are specific
static softkeys that display that cannot be changed. These are as follows:
1 - DIAL Allows you to dial out on the phone.
2 - CONF Begins a conference call with the active phone.
3 - XFER Transfers the active call to another number.
Note: For more information about configuring softkeys 1 through 6 to
perform specific functions, see
Chapter 5, “Configuring Operational
Features” the section, “Softkeys/Programmable Keys/Feature Keys/
Expansion Module Keys” on page 5-136 .
Symbol Keys Text Keys Key Description