AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 110)

41-001343-01 Rev 03, Release 3.2.2 3-23
Preferred Line
Note: This option can
be set by both Users
and Administrators.
preferred line Specifies the preferred line to switch focus back to when incoming or
outgoing calls end on the phone.
For more information on this feature, see “Preferred Line and
Preferred Line Timeout” on page 5-89 .
Preferred Line Timeout
(seconds)
Note: This option can
be set by both Users
and Administrators.
preferred line timeout Specifies the time, in seconds, that the phone switches back to the
preferred line after a call (incoming or outgoing) ends on the phone,
or after a duration of inactivity on an active line.
For more information on this feature, see “Preferred Line and
Preferred Line Timeout” on page 5-89 .
Goodbye Key Cancels
Incoming Call
Note: This option can
be set by both Users
and Administrators.
goodbye key cancels
incoming call Enable or disables the behavior of the Goodbye Key on the IP
phone.
For more information on this feature, see “Goodbye Key Cancels
Incoming Call” on page 5-92 .
Message Waiting
Indicator Line
Note: This option can
be set by both Users
and Administrators.
mwi led line Allows you to enable the Message Waiting Indicator (MWI) on a
single line or on all lines on the phone. For example, if you set this
parameter to 3, the LED illuminates if a voice mail is pending on line
3. If you set this parameter to 0, the LED illuminates if a voice mail is
pending on any line on the phone (lines 1 through 9).
For more information on this feature, see “Message Waiting Indicator
Line” on page 5-95 .
DND Key Mode
Note: This option can
be set by both Users
and Administrators.
dnd key mode Allows you to configure the DND mode to use on the phone
(Account, Phone, Custom) when the DND key is pressed. You can
configure DND for all accounts or a specific account.
For more information on this feature, see “DND Key Mode” on
page 5-97 . Also see Chapter 5 , the section, “Do Not Disturb (DND)”
on page 5-190 .
Call Forward Key Mode
Note: This option can
be set by both Users
and Administrators.
call forward key mode Allows you to configure the Call Forward mode to use on the phone
(Account, Phone, or Custom). You can configure Call Forward for all
accounts or a specific account.
For more information on this feature, see “Call Forward Mode” on
page 5-99 . Also see Chapter 5 , the section, “Call Forwarding” on
page 5-228 .
Use LLDP ELIN
Note: This option can
be set by both Users
and Administrators.
use lldp elin Enables or disables the use of an Emergency Location Identification
Number (ELIN) received from LLDP as a caller ID for emergency
numbers.
Caution: In Release 2.3 and later, LLDP is enabled by default. If
LLDP is enabled on your network, the phones may come up with
different network settings.
For more information on this feature, see “Link Layer Discovery
Protocol for Media Endpoint Devices (LLDP-MED) and Emergency
Location Identification Number (ELIN)”
on page 5-102 .
Parameter in
Aastra Web UI
Parameter in
Configuration Files
Description